2GIG Z-Wave 700 Programmable Thermostat (2GIG-STZ1-345)

<p>The 2GIG Z-Wave 700 Programmable Thermostat allows you to command your heating and AC systems from the thermostat or through your smart device using a Z-Wave network. The 2GIG Z-Wave 700 Programmable Thermostat works with most modern HVAC systems including: Standard Gas/Electric HVAC: 2-stage heating, 2-stage cooling. Heat Pump HVAC: 3-stage heating, 2-stage cooling and Humidifier/Dehumidifier support. The thermostat can be powered by 24VAC through the connected HVAC system if both "R" &amp; "C"wires are available at the thermostat or using four 4 AA batteries for up to two 2 years. DO not install batteries if the thermostat is powered by 24VAC. If the thermostat is battery powered it will not be able to repeat Z-Wave signals in your network. Contents: Thermostat, 4 x AA Batteries, Mounting Hardware, Install Manual and Quick Start Guide. NOTE: Not compatible with 120/240 VAC systems. Batteries are not required for backup power. Specifications: Programmable thermostat for: 24VAC 3H/2C non-heat pump/heat pump systems with humidifier/dehumidifier support. Room Temperature Measurement: Temp. Scale: Fahrenheit / Celsius user selectable. Temp. Range: 32 to 122 degrees F 0 to 50 degrees C. Temp. Accuracy: +/- 1 degrees F 0.5 degrees C. Temperature Setpoint Range: Heat Set Point: 32 - 90 degrees F 0 - 32 degrees C. Cool Set Point: 61 - 122 degrees F 16 - 50 degrees C. Setting resolution: 1 degrees F 0.5 degrees C. Standard Systems: 1 Stage Heating and Cooling, 2 Stage Heating and Cooling. Heat Pump Systems: 1 Stage Heating and Cooling, 2 Stage Heating and Cooling, 2nd or 3rd Stage Aux Heating Electric Heat Strips. Fan Control: Auto/On. Power Supply: AC: 18-26VAC 60Hz R and C. 4x AA size battery 6VDC. Operating Temperature Range: 32 to 122 degrees F 0 to 50 degrees C. Operating Humidity: 10-90 percent Non-Condensing. Size: 5.75 x 4.5 x 1 in 14.6 x 11.4 x 2.5 cm. Weight: 1lb 0.45kg. Warranty: Limited 1-year. Manufacturer Part #: 2GIG-STZ1-345.</p>

• Z-Wave 700 Thermostat compatible with most HVAC systems and Z-Wave hubs
• Capacitive touch buttons and bright LED screen provide clear info and controls
• Display shows current system mode, temperature set points, humidity, and time
• Fahrenheit/Celsius mode and sensor calibration
• Z-Wave 700 compatibility, SmartStart Support and S2 security