Nu-Calgon Scale Inhibitor,Clear,25 gal,Cylinder 4190-02

Humiditreat Scale Reducing Inline Filter for Whole House Humidifiers.  Description:Humidi-Treat is designed for humidifiers using up to 25 gallons per day, and will inhibit scale for one season. Install Humidi-Treat on the water line that supplies water directly to the humidifier.Application:Clean pad or install new pad before installing Humidi-Treat.For best results humidifier should have a daily dump of water from the sump to diminish • scale forming minerals.Install a new Humidi-Treat before each heating season.Humidi-Treat works best when installed on a cold water line.Humidi-Treat has internal 1/4" push-on fittings Installation Steps:* Shut off water.* Disconnect existing filter or cut water line where filter is to be installed*  "Quick Connect" fittings * Insure proper direction of water flow and connect inlet and outlet.* Carefully turn on the water and check for leaks* Check the filter after approximately 8 hours for slight leaks not visible during initial installationFilter Length - 5-1/4"

• Active Ingredient:Phosphoric Acid
• Application:Humidifiers, Water Treatment
• Biodegradability:Non-Biodegradable
• Characteristics:Slowly Soluble Polyphosphate
• Compatible Product Type:Humidifiers
• Container Type:Cylinder
• Fluid Base:Phosphoric Acid
• Fluid Color:Clear
• Food Grade:Not Food Safe
• For System Size:25 gpd
• Form:Powder
• Item:Scale Inhibitor
• Operating Temperature - Maximum:40 Degrees F
• Operating Temperature - Minimum:-80 Degrees F
• Product Type:Scale Inhibitor
• Series:Humidi-Pro
• Size:25 gal
• Standards:MSHA/OSHA