Wind Speed Monitoring Sensor with 0.8m Cable 3 Blade Anemometer for Weather Stations DC 5V RS485 Modbus Protocol IP64

This wind speed monitoring sensor delivers precise, real-time wind data for professional and industrial use. Designed for integration into environmental monitoring networks, it supports the Modbus RTU protocol over RS485 by default, enabling seamless communication with PLCs, data loggers, and control systems.FAQ:1. Which communication protocol should I use? For single-sensor PC connection, use the manufacturer’s private ASCII protocol. For multi-sensor setups with PLCs or programmable collectors, Modbus RTU is recommended.2. What are the default Modbus settings? Device address: 1, Baud rate: 9600, Data bits: 8, Stop bit: 1, Parity: None. Ensure 500ms+ interval between transmissions.3. How do I wire the sensor? Red = Power+, Black = A+, Yellow = B-, Green = Power-. Verify wiring before powering; never connect/disconnect under power. Item Type: Wind Speed Monitoring SensorMaterial: ABSProduct Size: Approx. 158x180x70mm / 6.2x7.1x2.8inSupply Voltage: DC5VCommunicating Type: RS485 (Default for Modbus Protocol)Measuring Range: Wind Speed 0‑45m/sExtension Line Length At Connection: 0.8 Meters/2.6ftAccuracy: ± (0.5+0.02V) M/s (V Represents The Real Time Wind Speed Value)Resolution: 0.1m/sStart Up Wind Speed: 0.8m/sMaximum Power Consumption: 0.48WLoad Capacity: DC12V Power Supply, Current Type Output Impedance 350ΩDC24V Power Supply, Current Type Output Impedance 900Ω, Voltage Type Output Impedance 1KΩOperating Environment: Temperature ‑35℃ to 60℃, Humidity 100.0% RH Without CondensationProtecting Grade: IP64Widely Used In: Greenhouse, Environmental Protecting, Ships, Docks, Breeding, Advertising Gates, Meteorology, Marine, Environment, Airports, Ports, Laboratories, Industry and and Transportation and Other Environments of Wind Speed Measurement.Wiring method (wire sequence respectively):Red: Power positiveBlack: A+Yellow:

• PREMIUM ABS CONSTRUCTION: Built with high-strength ABS material for low startup wind speed (0.8m/s), stable performance, and extended service life in demanding applications.
• IP64 & ANTI-INTERFERENCE DESIGN: Compact and lightweight housing with IP64 protection ensures reliable operation in humid or dusty environments while minimizing signal disruption.
• DUAL OUTLET CONFIGURATION: Features both bottom and side outlet options for flexible installation in weather stations, greenhouses, ports, laboratories, and industrial monitoring systems.
• HIGH DURABILITY IN HARSH CONDITIONS: Engineered for strong wind resistance and consistent 360-degree measurement across extreme temperatures from -35℃ to 60℃ with low power consumption (max 0.48W).
• INTEGRATED 0.8M EXTENSION CABLE: Comes with a pre-attached 0.8-meter cable featuring a sealed gasket interface for secure, connections without signal degradation.